If your machine takes a size we don't stock, we'll engineer it. Provide OD, ID, and height — we'll handle elastomer selection, internal sleeve design, and production.
The Process
Most custom orders move from inquiry to first article in 3–5 weeks. Repeat orders ship faster.
Tell us outer diameter, inner bore diameter, overall height, and what machine it goes in. A drawing or photo helps but isn't required.
We evaluate load, cycle rate, and operating environment to select the right elastomer compound and wall geometry.
We produce a sample set before full production. You can install and test them before committing to a full run.
Approved first articles go into production. Parts ship with a part number assigned for easy reordering.
Specification
The more detail you provide, the faster we can quote. At minimum, we need three dimensions and the application.
Materials
Compound selection affects load capacity, temperature range, chemical resistance, and fatigue life. We'll recommend the right one for your application.
Excellent damping and fatigue resistance. Best for high-cycle shock and vibration applications. Ideal for pellet mills, hammer mills, and general feed-mill duty.
Good oil and ozone resistance with moderate damping. A strong choice for environments with incidental lubricant splash or outdoor exposure.
High oil and fuel resistance. Specified for applications with direct lubricant or hydraulic fluid contact that would degrade natural rubber or neoprene.
High load capacity and abrasion resistance. Used in high-static-load applications where softer elastomers would creep under sustained compression.
Applications
Obsolete Equipment
Machinery from the 1980s and 90s is still running in mills and processing plants across the country. When the OEM discontinues a bushing, we can reverse-engineer it from a worn sample or drawing.
Modified Equipment
Machines get repaired and rebored. If a housing was bored oversize during a repair, the standard bushing no longer fits. We build to the new as-bored dimension.
New Builds
Fabricators and machine builders often need a bushing that matches their own design rather than an off-the-shelf part. We work directly with engineering teams.
Performance Upgrade
If you're replacing standard bushings frequently, a different wall thickness, durometer, or compound may dramatically extend service life. We can help diagnose and redesign.
Common Questions
It depends on size and compound, but most custom runs have a minimum of 25–50 pieces for the first article / tooling run. Repeat orders can be smaller. Contact us and we'll give you specifics for your dimensions.
From approved dimensions to first article: typically 3–5 weeks. Full production follows first article approval. Rush production is available on request — lead times depend on compound and quantity.
Yes. Send us the sample, a drawing, or clean measurements and we'll engineer to match. We can often improve on the original design — particularly wall thickness and compound selection.
Yes. We work in both inch and metric. Specify whichever system your machine uses and we'll hold tolerances accordingly.
That's what we're here for. Tell us what the bushing does, what it's exposed to, and how often it fails today. We'll recommend a compound and can back it up with reasoning.
Yes. Every custom part gets a Blue Bushings part number. Future reorders reference that number — no need to re-submit dimensions every time.
Send us your dimensions and application details. We'll come back with a quote and engineering notes — no obligation.
Start a Custom Quote →