Custom Dog Bone Bushings.
Built to Your Specs.

If your machine takes a size we don't stock, we'll engineer it. Provide OD, ID, and height — we'll handle elastomer selection, internal sleeve design, and production.

From your dimensions
to a finished part.

Most custom orders move from inquiry to first article in 3–5 weeks. Repeat orders ship faster.

01

Submit Your Dimensions

Tell us outer diameter, inner bore diameter, overall height, and what machine it goes in. A drawing or photo helps but isn't required.

02

Engineering Review

We evaluate load, cycle rate, and operating environment to select the right elastomer compound and wall geometry.

03

First Article

We produce a sample set before full production. You can install and test them before committing to a full run.

04

Production & Delivery

Approved first articles go into production. Parts ship with a part number assigned for easy reordering.

What we need
from you.

The more detail you provide, the faster we can quote. At minimum, we need three dimensions and the application.

  • ⌀
    Outer Diameter (OD)Fits into the receiving bore of the housing or frame. Must be held to tight tolerance — we centerless grind the outer sleeve.
  • ◯
    Inner Bore Diameter (ID)The shaft or pin diameter that passes through. This determines inner sleeve sizing and elastomer wall thickness.
  • ↕
    Overall HeightAxial length of the bushing. Determines elastomer column height and load capacity.
  • ⚙
    Application & EquipmentWhat machine, what joint, what load type (radial, axial, torsional, or combined). Helps us select durometer and compound.
  • #
    QuantityMinimum order quantities vary by compound and size. Tell us your anticipated annual usage for the best pricing.
OD ID H ELASTOMER WALL INNER SLEEVE

Elastomer compound options.

Compound selection affects load capacity, temperature range, chemical resistance, and fatigue life. We'll recommend the right one for your application.

Standard

Natural Rubber

Excellent damping and fatigue resistance. Best for high-cycle shock and vibration applications. Ideal for pellet mills, hammer mills, and general feed-mill duty.

Standard

Neoprene (CR)

Good oil and ozone resistance with moderate damping. A strong choice for environments with incidental lubricant splash or outdoor exposure.

Optional

Nitrile (NBR)

High oil and fuel resistance. Specified for applications with direct lubricant or hydraulic fluid contact that would degrade natural rubber or neoprene.

Optional

Polyurethane (PU)

High load capacity and abrasion resistance. Used in high-static-load applications where softer elastomers would creep under sustained compression.

When customers come to us
for a custom part.

Obsolete Equipment

OEM Stopped Making It

Machinery from the 1980s and 90s is still running in mills and processing plants across the country. When the OEM discontinues a bushing, we can reverse-engineer it from a worn sample or drawing.

Modified Equipment

Bore or Housing Modified

Machines get repaired and rebored. If a housing was bored oversize during a repair, the standard bushing no longer fits. We build to the new as-bored dimension.

New Builds

Custom Machine or Conveyor

Fabricators and machine builders often need a bushing that matches their own design rather than an off-the-shelf part. We work directly with engineering teams.

Performance Upgrade

Extending Bushing Life

If you're replacing standard bushings frequently, a different wall thickness, durometer, or compound may dramatically extend service life. We can help diagnose and redesign.

Custom bushing FAQ.

What's the minimum order quantity for a custom bushing?

It depends on size and compound, but most custom runs have a minimum of 25–50 pieces for the first article / tooling run. Repeat orders can be smaller. Contact us and we'll give you specifics for your dimensions.

How long does a custom order take?

From approved dimensions to first article: typically 3–5 weeks. Full production follows first article approval. Rush production is available on request — lead times depend on compound and quantity.

Can you match a competitor's bushing or a worn sample?

Yes. Send us the sample, a drawing, or clean measurements and we'll engineer to match. We can often improve on the original design — particularly wall thickness and compound selection.

Do you offer imperial and metric dimensions?

Yes. We work in both inch and metric. Specify whichever system your machine uses and we'll hold tolerances accordingly.

What if I don't know the right compound for my application?

That's what we're here for. Tell us what the bushing does, what it's exposed to, and how often it fails today. We'll recommend a compound and can back it up with reasoning.

Will you assign a part number for reorders?

Yes. Every custom part gets a Blue Bushings part number. Future reorders reference that number — no need to re-submit dimensions every time.

Ready to spec a custom bushing?

Send us your dimensions and application details. We'll come back with a quote and engineering notes — no obligation.

Start a Custom Quote →