Products › Food Processing › Bucket Elevator Boot Bushing
Bucket elevator schematic
Bucket Elevator — boot section pivot location
BB-FPR-1000-0625-1875

Bucket Elevator Boot Bushing

OD1.000"
ID0.625"
Height1.875"
LubeNone
Elevator Boot Pivot Radial + Axial Load Elastomer Bonded

Internally sleeved bushing for bucket elevator boot section pivot connections. Handles combined radial and axial loads from elevator tension and compensates for shaft mis-alignment that develops as boot bearings wear.

Request Pricing Request Spec Sheet
EquipmentBucket Elevator
ApplicationBoot Section Pivot
DesignCompression & Shear Elastomer
Sleeve materialSteel (stainless option available)
Sold throughDirect or dealer
Made inGeorgia, USA
Bucket Elevator — boot section pivot bushing application
Bucket Elevator — the boot section pivot is a common wear point addressed by BB-FPR-1000-0625-1875.
Why Internally Sleeved

Press it in. Press it out. Done.

Every Blue Bushings part bonds a rigid inner sleeve and outer sleeve to a high-grade elastomer wall. The elastomer absorbs all movement — no metal-on-metal contact, no grease fittings, no lube intervals. Installation is a straight press fit with no outer sleeve removal. Read the full design explainer →

Related Parts

More food processing bushings

BB-FPR-1125-0750-2125

Mixer Agitator Pivot Bushing

Industrial Mixer — Agitator Arm Pivot. OD 1.125" · ID 0.750" · H 2.125".
BB-FPR-0875-0500-1500

Conveyor Drive Pivot Bushing

Processing Conveyor — Drive Pivot. OD 0.875" · ID 0.500" · H 1.500".
BB-FPR-1250-0875-2250

Extruder Feed Arm Bushing

Extruder — Feed Arm Pivot. OD 1.250" · ID 0.875" · H 2.250".